Rear View Camera Settings - ESX VISION ANDROID Series Installation Manual

REAR VIEW CAMERA SETTINGS

If you have connected a compatible reversing camera to the camera input of the device, the camera
image is automatically displayed when reverse gear is engaged. This view is also shown when
pressing the camera direct button.
If your rear view camera does not have dynamic
guidelines, you can use the device's static parking
guidelines.
If you tap and hold the display, a gear icon will
appear in the top left corner. Tap to open the
camera view settings.
In this menu you can make various image settings
for the rear view camera.
NOTE: If no camera is connected, this view will show No Signal.
12
To do this, open the Car Infotainment menu
in Settings and then tap Video. Then enable
Reversing Assistant Line.
In the following dialog, enter the activation code
0000 and confirm with OK.