15.4
Changing the main fuse
Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The main fuse protects all electrical power consumers of the vehicle. The main fuse is under the seat.
–
Disconnect the negative cable of the 12-V battery to avoid
damage to the onboard electronics.
Main work
–
Connect a battery charger to the 12-V battery. Connect the
battery charger to the mains connection.
Battery charger (58429074200)
It is impossible to overcharge the 12‑V battery using this bat-
tery charger.
This battery charger is not suitable for lithium-ion batteries.
Info
V02564-10
Charge the 12-V battery to a maximum of 10 % of the
capacity specified on the battery housing.
–
Switch off the battery charger after charging and disconnect
from the 12-V battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Recharge the 12-V battery
regularly when the motorcy-
cle is not being used
–
Position the negative cable and mount and tighten the screw.
–
Position the negative terminal cover.
Finishing work
–
Mount the front rider's seat. (
–
Mount the passenger seat. (
–
Set time and date. (
Preparatory work
–
Remove the passenger seat. (
–
Remove the front rider's seat. (
ELECTRICAL SYSTEM 15
3 months
p. 69)
p. 68)
p. 45)
p. 68)
p. 69)
85