KTM 390 DUKE 2024 Owner's Manual page 99

–
Remove screws
forward and remove it.
W00562-10
–
Remove radiator cap
T04615-03
–
Loosen bleeder screw
Guideline
3 turns
–
Tilt the vehicle slightly to the right.
–
Pour in the coolant until it emerges without bubbles at the
bleeder screw, and then mount and tighten the bleeder screw
immediately.
Coolant (
A01455-10
–
Completely fill the radiator with coolant. Mount the radiator
cap.
–
Rest the vehicle on the side stand.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and allow it to warm up.
A
on the left fuel tank cover. Slide tank cover
1
.
2
.
p. 119)
COOLING SYSTEM 16
97