Abs; Mtc - KTM 390 DUKE 2024 Owner's Manual

7.24.5

ABS

7.24.6

MTC

–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Motorcycle is highlighted.
Press the SET button to open the menu.
–
Press the UP or DOWN button until ABS is highlighted. Press
the SET button to open the submenu.
–
Activate the menu item using the UP or DOWN button.
Warning
Danger of accidents An incorrectly selected ABS mode
I00512-10
makes control of the vehicle considerably more diffi-
cult.
The ABS modes are each only suitable for certain
conditions.
–
Always select an ABS mode that is compatible with
the surface of the ground.
–
Press the SET button to select the desired ABS mode.
Info
The ABS mode can be switched during the journey.
Do not open the throttle during the selection.
When the ABS mode Road is active, ABS controls both
wheels.
When the Supermoto ABS mode is active, ABS only con-
trols the front wheel. The rear wheel is no longer con-
trolled by ABS and may lock during braking maneuvers.
The indicator lamp ABS REAR lights up.
Condition
• Speed limiter function (optional) deactivated.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Motorcycle is highlighted.
Press the SET button to open the menu.
–
Press the UP or DOWN button until MTC is highlighted. Press
the SET button to open the submenu.
–
Activate the menu item using the UP or DOWN button.
–
Switch MTC on or off by pressing the SET button.
I00513-10
Info
Do not open the throttle when switching on or off.
Press the SET button briefly when activating the motor-
cycle traction control.
Hold down the SET button when switching off the
motorcycle traction control.
After the ignition is switched on, motorcycle traction
control is enabled again.
COMBINATION INSTRUMENT 7
33