Table of Contents
Advertisement
Chapter 4. BMC Setup
4.1 Overview of the Lenovo Think System Management Module
This section describes the features of the Remote Management Module.
The Remote Management Module runs on the server system as an integrated solution and integrates the embedded operating
system. Independent of the server operating system, the embedded operating system can provide a whole set of complete, stable
and effective solution for the server. As a system administrator, you can respond anytime and anywhere to emergency failure and
take remote control on the server through the network.
Features of the ThinkSystem Remote Management Module
The ThinkSystem Remote Management Module is easily accessible by remote KVM and controllable via LAN or Internet. It will
digitize and compress the collected video signal, keyboard, mouse signals and then send to the remote console. Embedded with remote
access and related control software, the module also allows integrated remote power management via IPMI. Key features of the Remote
Management Module are as follows:
• Embedded Web UI - Remote power on / off, system health, system information, alert notification and event log.
• USB 2.0 media redirection - boot from remote media
• Security - open source SSL
• Compatible with IPMI V2.0
• KVM - allow remote viewing and configuring in the POST and BIOS setup utility
91
Advertisement
Table of Contents
