Table of Contents
Advertisement
3.4.6.1 COM0
Console Redirection: Select Enabled to enable console redirection support for a serial port specified by the user. The options are Enabled
and Disabled.
If the item above set to Enabled, the following items will become available for user's configuration:
Console ReDirection Settings
Terminal Type
Bits per second
Date Bits
Parity
Description
This feature allows the user to select the target terminal
emulation type for Console Redirection:
- Select VT100 to use the ASCII Character set.
- Select VT100+ to add color and function key support.
- Select ANSI to use the Extended ASCII Character Set.
- Select VT-UTF8 to use UTF8 encoding to map Unicode characters into
one or more bytes. The options are VT100, VT100+, VT-UTF8, and ANSI.
Use this option to set the transmission speed for a serial port used in Console
Redirection.
Make sure that the same speed is used in the host computer and the client computer.
A lower transmission speed may be required for long and busy lines. The options
are 9600, 19200, 38400, 57600 and 115200 (bits per second).
Use this feature to set the data transmission size for Console Redirection. The
options are 7 and 8.
A parity bit can be sent along with regular data bits to detect data transmission errors.
- Select Even if the parity Bit is set to 0, and the numBer of 1's in data Bits is even.
- Select Odd if the parity Bit is set to 0, and the numBer of 1's in data Bits is odd.
- Select None if you do not want to send a parity Bit with your data Bits in transmission.
- Select Mark to add a mark as a parity Bit to be sent along with the data Bits.
46
Advertisement
Table of Contents
