Table of Contents
Advertisement
If the item above set to Enabled, the following items will become available for user's configuration:
Console Redirection Settings
Terminal Type
Bits per second
Flow Control
Data Bits
Parity
Stop Bits
3.4.7 PCI Subsystem Settings
This menu provides standard PCIe configuration settings and information.
Description
This feature allows the user to select the target terminal
emulation type for Console Redirection.
Select VT100 to use the ASCII Character set.
Select VT100+ to add color and function key support.
Select ANSI to use the Extended ASCII Character Set.
Select VT-UTF8 to use UTF8 encoding to map Unicode characters into one or
more bytes.The options are VT100, VT100+, VT-UTF8, and ANSI.
Use this feature to set the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host computer and the
client computer. A lower transmission speed may be required for long and busy lines.
The options are 9600, 19200,38400, 57600, and 115200 (bits per second).
Use this feature to set the flow control for Console Redirection to prevent data loss
caused by buffer overflow.
Send a "Stop" signal to stop sending data when the receiving buffer is full.
Send a "Start" signal to start sending data when the receiving buffer is
empty.The options are None, Hardware RTS/CTS, and Software Xon/Xoff.
8
None
1
49
Advertisement
Table of Contents
