Advertisement
Portable Lab Quick Start Guide
Step 4
Click on OK (in the bottom of the dialog box)
when done.
6 Recording a Measurement
Step 1
Within the Home screen, click on the myoMOTION
(or myoMuscle/myoVideo) module icon.
Create a New Subject
Select New Configuration.
Step 2
Insert the devices to be used for the measurement
into the configuration by dragging a device in from
the list of Available Devices.
You may configure each hardware item here. Refer
to the appropriate user manual for information on
these settings.
Continue to the next step by selecting Measure.
Step 3
After checking for normal operation, you are ready
to record a measurement. Select Record at the top
left of the screen and begin your protocol.
After completing your record, select Stop and Save.
Save the record as the name of your configuration,
or type in a new name. After this, save your record
or Discard & measure again.
(Rev B)
19
Advertisement
