Advertisement
AMTI Force Plate System Setup Guide
Step 3
If you are using the Noraxon MyoSync to synchronize
your data with another device, configure the sync
setting here.
Check the box that says 'Enabled.'
Navigate to the 'AMTI plate 1' tab. Choose "Load"
ACL file to load the *acl file that should have come
with your AMTI force plates.
Note: If your force plate does not come with an .acl
file, please contact Noraxon Support
(support@noraxon.com) to discuss other integration
options.
Step 4
Repeat Step 3 with your second force plate (if
applicable). Select Ok to exit the Hardware Setup
Dialog
5 Recording a Measurement
Step 1
Within the Home screen click the myoFORCE module
icon.
Create a New Subject.
Select New Configuration.
(Rev B)
8
Advertisement
