Advertisement
Portable Lab Quick Start Guide
5 Configuring the Hardware
Step 1
Open MR3, typically listed under Noraxon ->
MR3
Click on the Hardware Setup button in the upper
right-hand corner.
Step 2
Insert Hardware:
Select the desired hardware icon to insert,
within the 'New Device' column, and click on the
Insert button. Repeat for each hardware item.
Note: Be sure to include the MyoSync icon to
synchronize all hardware included in the
measurement.
Step 3
After each hardware item is inserted, a Settings
dialog will appear as shown. Adjust the settings
as necessary.
Refer to the user manual for each hardware item
for a detailed description of the settings.
MyoMotion User Manual
Ultium EMG User Manual
Ninox User Manual
(Rev B)
18
Advertisement
