Advertisement
Portable Lab Quick Start Guide
Ultium Portable Lab Hardware Setup Instructions
The third-generation Portable Lab System includes Ultium Motion and EMG sensors with optional Ninox
125 and 300C cameras.
Ultium Receiver(s)
Two Ultium receivers are embedded directly into the lid of the Ultium Portable Lab system. The LED
indicator for each Ultium system can be viewed as shown on the Ultium Portable Lab lid. The LED indicator
will blink BLUE instead of the normal solid blue LED. The change in LED behavior signifies a Ultium Portable
Lab receiver. All other LED color representations are unchanged.
Ultium
Receiver 1
LED
(Rev B)
Ultium
Receiver 2
LED
10
Advertisement
