Advertisement
Portable Lab Quick Start Guide
Welcome from Noraxon
Congratulations on acquiring your new Portable Lab System!
This guide will provide you with step-by-step instructions on how to install your new
hardware, adjust device settings, and record your first data set.
Let us begin by walking through the installation of your new hardware.
Note: This is not meant to be a complete manual, but a guide to help you get started with your system. For
more detailed instructions on operating any of the systems (Ultium, DTS, Research PRO) within the Portable
Lab refer to the appropriate user manual.
1 System Unboxing
Upon arrival, carefully remove all contents and verify the following components are present.
Contents will vary depending on the purchased package.
1.1 PL1 System
Figure 1 - Portable Lab
Figure 2 – PSU9
Figure 3 - USB cables (CBL33)
2
(Rev B)
Advertisement
