Advertisement
AMTI Force Plate System Setup Guide
1. Open MR3
2. A dialog box will indicate how many more times MR3 can
be opened
3. Click on "Activate"
4. Enter the License ID provided on your USB flash drive and
press "OK"
5. If you have an internet connection, click Activate by Internet
for immediate activation
6. Alternatively, email the provided activation ID to
activation@Noraxon.com
respond by phone with the Activation Code. Enter the
provided Activation Code to remove any restrictions on use.
4 Configuring the Hardware
4.1 Digital Integration
Before the AMTI system can be used, the device software settings must be configured to recognize the different
components that make up the system. Follow the below instructions to update the plate settings.
Step 1
Open MR3, typically listed under Noraxon -> MR3
Click on the Hardware Setup button in the upper right-
hand corner
Step 2
Select the AMTI icon, within the 'New Device' column,
and click on the Insert button.
(Rev B)
.
Noraxon Support will email or
6
Advertisement
