Toshiba IK-WB02A User Manual page 107

Symptom
GThe iris switch is not set
No images are
displayed. properly.
GThe iris of your lens is
not adjusted properly.
GAny of the cables are not
connected properly.
GThe video monitor is not
The colors of
images are poor. adjusted properly.
GLightings are dim.
GThe Internet line is busy.
Cannot display
images from the
network camera.
GThere are not enough
resources (CPU power,
RAM).
GPicture size is too large.
Renewal speed
of network
camera images
is too slow.
GPicture quality is too
(Part 1)
high.
GMore than one users are
Renewal speed
of network accessing the camera at
camera images the same time.
is too slow.
(Part 2)
GInstalled the camera in
The network
camera images wrong way.
are reversed in
upside-down.
Cause
GSet the iris switch properly for your lens.
GAdjust the iris of your lens properly.
GConnect the cable properly.
GAdjust the video monitor properly.
GBrighten the lightings.
GWait for a little while. Sometimes it takes time to display
images.
GThere are the recommended requirements of PC to
view the images of the network camera.
(→ page 12)
GClose all applications other than the network camera
browser.
GThe default setting of picture size is QVGA(320x240).
To increase the speed, select a small image size in
"Resolution" of "Camera Window."
GWhen you lower the image quality in "Quality" of
"Camera Window," the renewal speed becomes faster;
however, the picture quality becomes poor.
GWhen many users access to the camera at the same
time, the renewal speed of the image becomes slow.
GMake sure that the camera is installed in right way.
Adjust the setting to place the "Toshiba" logo in the
right direction.
How to Manage
91