Toshiba IK-WB02A User Manual page 106

Before Calling Service Personnel... (Cont.)
Symptom
Cannot perform
settings.
90
Cause
GLost the power of the
camera during the
performance.
GLAN cable of the camera
has been pulled off
during the performance.
GLAN cable of the PC has
been pulled off during the
performance.
GLost the power of a hub
or router during the
performance.
GIP address in
"Connection Settings" in
"Network Settings" has
been changed.
How to Manage
GMake sure that the power of the network camera is ON.
GMake sure that the LAN cable is connected to a hub or
router in the right way.
GMake sure that the LAN cable is connected to a hub or
router in the right way.
GMake sure that the power of a hub or router is ON.
GIf you change the IP address, you cannot keep your
settings in the setting screen with your old IP address.
Search your camera with the application, Camera
Finder, and try administrator login procedure again.
GWhen you enter IP address of the camera directly to
the browser, enter the new IP address in URL like
example below, and try login procedure again.
http://192.168.0.40/