BEFORE INSTALLING OR CONNECTING IK-WB02A TO
YOUR PC, READ THIS QUICK START GUIDE
Quick Start Guide
Quick Start Guide for Network connection
The following software must be downloaded and installed
before installing the IK-WB02A:
• Internet Explorer
http://www.microsoft.com/windows/ie
• Toshiba Camera Finder software
The software is included on the supplied mini CD-ROM.
1) Connect the IK-WB02A to your network using a Cat5/
Ethernet cable BEFORE powering on your camera.
Repeat this step for any additional cameras.
Obtained IP address
depends on DHCP
or
Static IP address
192.168.0.30
Ethernet cable ( straight-through cable)
2) Power on your devices in the following order: cable or
DSL modem, router or hub, PCs.
3) Power on the IK-WB02A.
STOP!
THANK YOU
TM
Version 6.0 or later
Network camera
Internet
Hub
Ethernet cable (straight-through cable)
Personal computer