Toshiba IK-WB02A User Manual page 105

Symptom
GEntering wrong login ID
Error message
shows up when and password.
trying to login.
GCapsLock of the PC is
ON.
GYou forget your login ID
and the password.
GDefault gateway is not
Cannot access to
the camera from configured.
the Internet.
GPort forwarding is not
configured to the
broadband router.
GSetting access restriction
from the Internet (WAN
side), like IP filter, to the
broadband router.
GUsing local (private) IP
address.
GThe IP address which
was provided from the
DHCP server of the
provider has been
changed.
Cause
GEnter right login ID and password.
*The default login ID is "root," and the password is "ikwb."
GThe camera discriminates capital letter and lower-case
letter. Enter your right login ID and password.
GYou need to reset the camera. Remember that if you
perform reset procedure of the camera, all the settings
you have made will be deleted and the camera goes
back to its default settings.
GRegister your broadband router to the network camera
as default gateway. (¡ page 66)
GConfigure port forwarding function (static IP
masquerade, NAPT) to your broadband router. For
details, read the user's guide of your broadband router.
GChange the restriction setting. For details, read the
user's guide of your broadband router.
GWhen accessing via the Internet, you need to set
global IP address provided from your Internet provider
to the broadband router. For details, read the user's
guide of your broadband router.
*There are fixed IP address and IP address from DHCP
server that an Internet provider provides as a global IP
address. Ask your Internet provider for more information.
GConfirm the new IP address and try to access again
with the new IP address.
GRenew the information registered to the DDNS server.
How to Manage
89