Lenovo ThinkSystem SD665-N V3 Manual page 24

Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPTR4001I Date and Time set by user [arg1]: Date=[arg2], Time-[arg3], DST Auto-
adjust=[arg4], Timezone=[arg5].
FQXSPTR4002I Synchronize time setting by user [arg1]: Mode=Sync with NTP Server,
NTPServerHost1=[arg2]:[arg3],NTPServerHost2=[arg4]:[arg5],
NTPServerHost3=[arg6]:[arg7],NTPServerHost4=[arg8]:[arg9],
NTPUpdateFrequency=[arg10].
FQXSPTR4003I Synchronize time setting by user [arg1]: Mode=Sync with server
clock.
FQXSPUN0009I Sensor [SensorElementName] has asserted.
FQXSPUN0017I Sensor [SensorElementName] has transitioned to normal state.
FQXSPUN0026I Device [LogicalDeviceElementName] has been added.
FQXSPUN0056I Sensor [SensorElementName] has deasserted.
FQXSPUN2009I Sensor [SensorElementName] has deasserted.
FQXSPUN2012I Sensor [SensorElementName] has deasserted.
FQXSPUN2018I Sensor [SensorElementName] has deasserted the transition from
normal to non-critical state.
FQXSPUN2019I Sensor [SensorElementName] has transitioned to a less severe state
from critical.
FQXSPUN2020I Sensor [SensorElementName] has deasserted the transition to non-
recoverable from a less severe state.
FQXSPUN2023I Sensor [SensorElementName] has deasserted the transition to non-
recoverable.
FQXSPUP0002I A firmware or software change occurred on system
[ComputerSystemElementName].
FQXSPUP4001I Flash of [arg1] from [arg2] succeeded for user [arg3] .
FQXSPUP4002I Flash of [arg1] from [arg2] failed for user [arg3].
FQXSPWD0000I Watchdog Timer expired for [WatchdogElementName].
FQXSPWD0001I Reboot of system [ComputerSystemElementName] initiated by
watchdog [WatchdogElementName].
FQXSPWD0002I Powering off system [ComputerSystemElementName] initiated by
watchdog [WatchdogElementName].
FQXSPWD0003I Power cycle of system [ComputerSystemElementName] initiated by
watchdog [WatchdogElementName].
FQXSPWD0004I Watchdog Timer interrupt occurred for [WatchdogElementName].
FQXSPBR4001I Running the backup Management Controller [arg1] main application.
FQXSPCA0007J Numeric sensor [NumericSensorElementName] going high (upper
non-critical) has asserted.
FQXSPCA0015J Sensor [SensorElementName] has transitioned from normal to non-
critical state.
FQXSPDM4002I Device [arg1] VPD is not valid.
20
ThinkSystem SD665-N V3 Messages and Codes Reference
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Warning
Warning
Warning
Warning