Lenovo ThinkSystem SD665-N V3 Manual page 166

3. If problem persists, collect Service Data log and
• FQXSFMA0059I: Bank Sparing executed on High Bandwidth Memory CPU [arg1] Channel [arg2]
Pseudo-Channel [arg3].
Severity: Info
User Action:
Information only; no action is required.
• FQXSFMA0060I: Partial Cache Line Sparing executed on High Bandwidth Memory CPU [arg1]
Channel [arg2] Pseudo-Channel [arg3].
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU0001N: An unsupported processor has been detected.
Severity: Error
User Action:
Complete the following steps:
1. Check Lenovo support site for a firmware update required for this processor and install that update, if
applicable.
2. If the problem persists, collect Service Data logs.
3. Contact Lenovo Support.
• FQXSFPU0002N: An invalid processor type has been detected.
Severity: Error
User Action:
Complete the following steps:
1. Verify that the Processor is a valid option that is listed as a Server Proven device for this system. If a
non-supported processor is identified, remove that Processor or replace with a supported Processor.
2. Check Lenovo support site for a firmware update required for this Processor and install that update,
if applicable.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFPU0003K: A processor mismatch has been detected between one or more processors in the
system.
Severity: Error
User Action:
Complete the following steps:
1. This message could occur with messages about other Processor configuration problems. Resolve
those messages first.
2. If the problem persists, ensure that matching processors are installed (i.e., matching option part
numbers, etc).
3. Verify that the Processor's are installed in the correct sockets according to the service information for
this product. If not, correct that problem.
162
ThinkSystem SD665-N V3 Messages and Codes Reference