Safety Precautions; Temperature Set Back Timer; Features And Functions; Economy Operation - Fujitsu ARTG24LMLC Operation Manual

SAFETY PRECAUTIONS

● Operate only with air fi lters installed.
CAUTION
● Do not block or cover the intake grille and outlet port.
● Ensure that any electronic equipment is at least 1m away from either the indoor or outdoor
units.
● Avoid installing the air conditioner near a fi replace or other heating apparatus.
● When installing the indoor and outdoor units, take precautions to prevent access by infants.
● Do not use fl ammable gases near the air conditioner.
● This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not play with the appliance.
● If you see lightning or hear thunder, there might be a lightning strike. To prevent electric
shock hazard, turn off the air conditioner by using the remote controller, and do not touch
the unit or the power plug during thunderstorm.
● Do not place any other electrical products or household belongings under indoor unit or
outdoor unit. Dripping condensation from the unit might get them wet, and may cause dam-
age or malfunction of your property.
● Keep clean and tidy around the outdoor unit, and do not place the things around it. If it is
covered with fallen leaves, there could be an infiltration of small animals or insects whose
contact with the internal electrical components leads to the product malfunction.
● Do not stand on unstable steps when operating or cleaning the air conditioner. It may overturn
and can cause the injury.

FEATURES AND FUNCTIONS

■
Energy saving and Comfortable function
INVERTER
At the start of operation, large amount of power is used to
bring the room quickly to the desired temperature. Afterwards,
the unit automatically switches to a low power setting for eco-
nomic and comfortable operation.

ECONOMY OPERATION

When ECONOMY operation mode is operated, the room tem-
perature will be little higher than the set-temp under cooling
mode and lower than set-temp under heating mode. Therefore,
the ECONOMY mode is able to save more energy than other
normal mode.
AUTO CHANGEOVER
The operation mode (cooling, dry, heating) is switched auto-
matically to maintain the set temperature, and the temperature
is kept constant at all times.
■
Convenient function
WEEKLY TIMER
Use this timer function to set operating times for each day of
the week. Use the DAY OFF setting to switch off timed opera-
tion for a selected day in the coming week. Because all days
can be set together, the weekly timer can be used to repeat
the timer settings for all of the days.

TEMPERATURE SET BACK TIMER

Use this timer function to change the set temperature in the
operation times set for each day of the week. This can be used
together with other timer settings.
■
Remote controller
WIRED REMOTE CONTROLLER
The wired remote controller allows convenient control of indoor
unit operation.
WIRELESS REMOTE CONTROLLER (OPTION)
The optional wireless remote controller can be used. When
you use remote controller, there are following diff erent points
as compared with using wired remote controller.
[The additional function for wireless ones]
• SLEEP timer
• TIMER
• 10 °C HEAT operation
And you can use both wireless and wired remote controller
simultaneously. (But function is limited.)
[The restricted functions for wired ones]
• Weekly timer
• Temperature set back timer
3