GE TLE 625 UL S2 User Manual page 33

Active power
Apparent power
Power factor
Status
Inverter operating time
Apparent power
UPS operation time
Active Power
eBoost operation time
Overload counter
IEMi operation time
Voltage DC-link 2
Status
Temperature a / b / c / d
Modifications reserved
GE_UPS_USM_TLE_SUL_M62_1M0_2US_V010.docx
Critical Power
Load active power (kW) for each phase.
Load apparent power (kVA) for each phase.
Load power factor: + inductive load / - capacitive load
Source of the power supplied to the Load.
Total operating time for the Inverter (in hours).
Total apparent Load power (kVA).
Total operating time for the UPS (in hours).
Total effective Load power (kW).
Total operating time for the UPS in eBoost™ Operation Mode (in hours).
This counter is displayed only when eBoost™ Operation Mode is available
(option).
Total number of detected output overloads.
Total operating time for the UPS in IEMi Operation Mode (in hours).
This counter is displayed only when IEMi Operation Mode is available (option).
DC-link 2 voltage.
Booster status (Off / Booster / Charger).
a- Booster temperature (lower left module).
b- Booster temperature (upper left module).
c- Booster temperature (lower right module).
d- Booster temperature (upper right module).
LOAD SCREEN
Voltage L1 / L2 / L3
Output voltage PHASE/NEUTRAL for
each phase.
Current L1 / L2 / L3
The output current as RMS values for
each phase.
Percent load L1 / L2 / L3
The output Load as percentage for each
phase.
BOOSTER SCREEN
Battery voltage
The battery voltage.
Battery current
The battery current (negative values
correspond to the discharge of the
battery).
Voltage DC-link 1
DC-link 1 voltage.
User Manual TLE Series 625 - 750 - 1000 UL S2
Page 33/92