Spare Parts; Recommendations Of Lubricants (For All Manufactures); Main Casing; Application Temperature From -35°C To +100°C - SCHIEBEL AB3 Operating Instructions Manual

Operating Instructions for Actuators Type AB with Control Unit
OM-ENGLISH-ABCSC.V1.2-16xx-V2.02-2023.04.27
fuse F2: control fuse before the control transformer
supplyvoltage
440VAC 125mA T
100mA T
> 440VAC
(2 Stück)
NOTE: Actuators which are suitable for operation in explosive atmosphere, no fuses are located in the connec-
tion compartment! The control fuse is installed in the flameproof area of SMARTCON control unit and is not
accessible to the user!
The logic board of the controller cover (see Figure 49, page 25) features two miniature fuses for the control
lines
FL2
FL1
Figure 49: FL1. . . Fuse
FL2. . . Fuse for the binary outputs
Fuses on the logic board
Fuse
FL1
FL2

9 Spare parts

When ordering spare parts, please provide us with the serial number of the (see section 2.2, page 6). Check
the separate break-down image and separate list of spare parts.

10 Recommendations of Lubricants (for all manufactures)

NOTE: Please note, that safety precautions such as the use of personal protective equipment (PPA) may have
to be followed! Please consult the safety datasheet (in section 8) of the product in question.

10.1 Main Casing

10.1.1 Application temperature from -35°C to +100°C
Lubricating grease DIN 51826 - GP 00 P-30
i.e. High pressure (EP), complex grease on Li soap basis:
value Recommended Type
G-fuse, brand SIBA, type 189140, ceramic 6,3 x
32mm; 125mA; time lag, 500V, I
G-fuse, brand SIBA, type 189140, ceramic 6,3 x
32mm; 100mA; time lag, 500V, I
for auxiliary supply,
Value
1AT Littelfuse 454 NANO
4AT Littelfuse 454 NANO
2 2
t = 0,08A
2 2
t = 0,05A
FL2
FL1
Figure 50: Logic-Board
Manufacturer
2 ®
Slo-Blo träge
2 ®
Slo-Blo träge
9 Spare parts
Spare part
designation
C606g
s
C606f
s
List of spare parts
FUSE-F1
FUSE-F2
JP6
JP5
JP4
JP3
JP2
JP1
25