Interruption Of The Booting Process; Service - KBL megaSun K7S Operating Instructions Manual

OPERATION IN MOBILE FACILITIES
Mobile facilities include among others water and rail
vehicles. Additional safety measures are required for
operation on/in any type of carrier vehicle!
Risk of injury due to sudden
movements.
In the event of sudden movements of
the carrier vehicle, the tanning device
can slip or tip over and cause serious
injuries.
• The tanning device must be secured
against slipping and tipping over.
• No tanning may take place if acceler-
ation forces or movements occur.
• Operation only in compliance with
all legal regulations that apply to the
operation of tanning devices on/in
mobile facilities.
8
Operating instructions | 1/2 | megaSun K5/K6/K7 PRODUCT SERIES
WARNING
TEMPERATURE DIFFERENCES
Risk of damage when switching on
the mains voltage
If there are large temperature differ-
ences between the tanning device and
the environment, the tanning device
must not be put into operation.
• Wait at least 2 hours so that the tem-
perature can equalise.
Interruption of the booting
process
If the boot process (start attempt) is
interrupted several times, the software
version is automatically reset to the pre-
vious version.
• Returning to the latest version is only
possible by a manual update.

Service

If you have any questions regarding service, please
contact your local specialist dealer.