Training Of The Operating Personnel; Measure To Maintain Operational Safety; Updating The System Software; Timer - KBL megaSun K7S Operating Instructions Manual

Training of the operating
personnel
The studio operator is obliged to train his operating
personnel and to instruct them in the applicable laws
and accident prevention regulations. He must ensure
that his operating personnel has understood and fol-
lows these instructions:
This includes:
• Operating instructions.
• Safety instructions.
• Information on intended use and foreseeable
misuse.
• Cleaning / disinfection and maintenance instructions
• Your instructions and the manufacturer's informa-
tion must be available to the operating personnel at
the workplace. Regularly check the safety aware-
ness of your operating personnel and their under-
standing of risks, taking into account the operating
instructions of this tanning device.
• Ensure that cleaning and disinfection intervals are
observed, especially cleaning and disinfection of
the tanning device after each use.
• Ensure that your operating personnel provides
appropriate advice to users regarding tanning
times, possible risks and the operation of the tan-
ning device.
Measure to maintain operational
safety
To maintain operational safety, the tanning device
must be subjected to periodic inspections by KBL
customer service or an approved specialist company
every 12 months from the time of commissioning.
Inspection and maintenance work must be entered in
the inspection and operating logbook of the tanning
device! (KBL item number: 1100117110)

Updating the system software

Danger of hardware defects due to loss
of voltage.
Electronic components can be damaged
by loss of voltage during the update.
• Ensure that the tanning device is not
disconnected from the mains voltage
during the update process.
• To carry out the update, use the software offered by
KBL for download. (https://media.kbl.de)
• For detailed information on the procedure, please
refer to the documentation enclosed with the
software.

Timer

This tanning device must be operated via an external
timer that meets the requirements of EN 60335-2-27,
cl. 22.105.

Tanning times

The tanning times specified in these instructions must
be observed!

Stop button

A stop button is located at the head end of the tanning
device, with which the current tanning process can be
interrupted.
To continue tanning
-> Press the START button on the con-
trol panel.
Operating instructions | 1/2 | megaSun K5/K6/K7 PRODUCT SERIES
11