Wireless Charging - KBL megaSun K7S Operating Instructions Manual

• A beep twice signals that your player is connected to
the tanning device.
megaSun 01
• Set a medium volume on your player and start play-
ing music.
• Adjust the desired volume on your player.
• During tanning, the volume can be adjusted via the
control panels of the tanning device.
DISCONNECTING AN EXTERNAL PLAYER
An existing connection is automatically disconnected
after tanning is completed.
If no tanning is started within 6 minutes after the
connection has been established, the contact is also
automatically interrupted.
BLUETOOTH DEVICE COMPATIBILITY
KBL GmbH attaches the greatest possible importance
to hardware compatibility! Due to the large number
of manufacturers of Bluetooth devices, compatibility
cannot be 100% guaranteed. In rare cases, it may not
be possible to establish a connection.
megaSun 01
TROUBLESHOOTING
Each Bluetooth device offers a list of paired devices.
Delete the older entries in this list whose profile over-
laps with the one with which you want to pair your
player (e.g. identical names). Then restart the device
recognition.
The Bluetooth function must be activated
in the service menu.

Wireless charging

A charging station for wireless charging is located on
the right-hand base of the device.
Devices suitable for wireless charging can simply be
placed here and charged.
Operating instructions | 1/2 | megaSun K5/K6/K7 PRODUCT SERIES
15