Device Connections; Level Adjustment - Studio Signal - KBL megaSun K7S Operating Instructions Manual

Device connections

You will find information on other device
connections in your installation instruc-
tions in the chapter " Connection &
Commissioning ".

Level adjustment - studio signal

The components of the voice / audio system are
installed in the canopy. For level adjustment, the sec-
ond filter cartridge from the left must be removed.
REMOVE THE FILTER CARTRIDGE.
Ⓐ
Ⓐ
Remove the filter cartridge.
Installation instructions for filter cartridges:
-> Seal always to the outside!
There is a rotary control for level adjustment on the
level adjustment board. Select the level setting so
that overdriving is prevented. This depends on the
strength of the external signal and should be done by
a service technician.
Further adjustments can be made in the
service menu.
Operating instructions | 1/2 | megaSun K5/K6/K7 PRODUCT SERIES
13