Using Different Music Sources; Bluetooth® Connection - KBL megaSun K7S Operating Instructions Manual

Using different music sources

The music source can be selected and changed at
any time on both control panels. The tanning device
can be operated with the following music sources:
INTERNAL MP3 PLAYER
To operate the internal MP3 player, use the original
music tracks stored on the SD card.
EXTERNAL MUSIC SOURCES
Tanning devices with standard line level up to low
speaker levels can be connected. These include:
• Studio music.
• External Bluetooth players (smartphones, etc.).
EXTERNAL 100 V MUSIC SIGNAL (OPTION)
For connection to a 100 V audio system, a trans-
former (KBL no.: 9100 0170 00) is required.
The connection must be carried out by trained service
personnel!
14
Operating instructions | 1/2 | megaSun K5/K6/K7 PRODUCT SERIES
Bluetooth® connection
In order to connect external Bluetooth players (smart-
phones, etc.) wirelessly to the tanning device, a
Bluetooth interface is optionally available.
CONNECTING AN EXTERNAL PLAYER
A Bluetooth connection can be established in standby
and tanning mode.
Make sure that you are in the reception
zone (approx. 2 metres).
Make sure that your player is configured
to search for other Bluetooth devices. If
this is not the case, activate Bluetooth
manually. Please read the operating
instructions of your player.
• Depending on your settings, the searching is per-
formed automatically or manually. All available
Bluetooth compatible tanning devices within range
are listed after a short time.
• Select the desired tanning device from the available
ones. The Bluetooth device names for your tanning
devices can be freely assigned in the service menu.
• If necessary, confirm the displayed code and con-
nect again. Not every smartphone asks for a code.
megaSun 01
megaSun 01