Old Equipment Disposal; Ambient Conditions - KBL megaSun K7S Operating Instructions Manual

Old equipment disposal

This tanning device consists of
components that cannot be thrown into
the household garbage!
Dispose of your old equipment in an environmentally
friendly manner after the end of its useful life. Metals
and plastics can be recycled. Electrical and elect-
ronic components must be disposed of as e-waste.
Fluorescent lamps must be dropped off at authorized
collection points for pollutants.
This helps to avoid damaging effects to the environ-
ment and human health caused by improper disposal.
This makes a valuable contribution to recycling and
other forms of utilization of old electrical and electro-
nic equipment.
You can obtain information about environmentally
friendly disposal from your local government or the
municipal administrations.
Components containing quicksilver
There is a risk of quicksilver poisoning
due a broken lamp.
• Ventilate the room/environment, at
least 15 minutes before disposing of
the broken lamps.
CAUTION

Ambient conditions

Operation only in dry rooms with sufficient aeration
and ventilation.
Do not operate the tanning device in
aggressive ambient conditions (e.g. in
air containing chlorine or salt).
RISK OF OVERHEATING DUE TO
OBSTRUCTION OF THE AIR FLOW
The supply and return air areas at the tanning device
may not be modified, built over or blocked. Do not
make unauthorised changes to the tanning device.
The manufacturer is not responsible for damages and
injuries resulting from such actions.
• Pay attention to aerodynamic data and keep the
minimum distances to the ceiling, floor and walls.
See chapter -> Technical data .
Insufficient air supply leads to over-
heating, which can damage the tanning
device!
Operating instructions | 1/2 | megaSun K5/K6/K7 PRODUCT SERIES
7