Table of Contents
Advertisement
Second rinsing cycle
Open the control panel.
1.
Remove the water tank, rinse thoroughly, fill with
2.
water and reinsert.
Close the control panel.
3.
Press the l Start/Stop button to start.
4.
The appliance rinses.
Once the duration has elapsed, an audible signal
sounds.
Rinsing
Open the control panel.
1.
Empty and dry the water tank.
2.
Press the # On/Off button to switch off the
3.
appliance.
Descaling is complete and the appliance is ready for
use again.
qAppliance door
With good care and cleaning, your appliance will retain
A p p l i a n c e d o o r
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
appliance door and clean it.
Removing and fitting the appliance door
For cleaning purposes and to remove the door panels,
you can detach the appliance door.
The appliance door hinges each have a locking lever.
When the locking levers are closed (figure
appliance door is secured in place. It cannot be
detached.
When the locking levers are open in order to detach the
appliance door (figure
cannot snap shut.
:
Warning
Risk of injury!
If the hinges are not locked, they can snap shut with
■
great force. Ensure that the locking levers are always
fully closed or, when detaching the appliance door,
fully open.
The hinges on the appliance door move when
Risk of injury!
■
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Removing the appliance door
Open the appliance door fully.
1.
Fold open the two locking levers on the left and right
2.
(figure
).
!
Close the appliance door as far as the limit stop ‚.
3.
With both hands, grip the door on the left- and right-
hand side ƒ, and pull it out upwards (figure
Appliance door en
), the
!
), the hinges are locked. They
"
).
"
31
Advertisement
Table of Contents
