Visual Inspection Of The Operating Panel; Visual Inspection Of The Transceiver Unit - Kongsberg Simrad ST90 Manual

Simrad ST90 Factory Acceptance Test

Visual inspection of the Operating Panel

A visual inspection of the Operating Panel is required to verify its physical condition and
appearance prior to delivery.
Prerequisites
The ST90 system has been set up with its hardware units connected as specified in the
Installation Manual. The ST90 system is turned off. Neither tools nor instruments are
required.
Procedure
1 Make sure that the unit's serial number has been recorded in the list of hardware items.
2 Make sure that the Operating Panel is new.
3 Make sure that the unit is not physically damaged, and that the surfaces and paint-work
are clean without dents or scratches.
4 Make sure that the unit has been identified with the relevant product label(s), and that
one label includes the part and serial numbers.
Result
Requirements
The Operating Panel is new, clean and free from scratches, dents or other
physical damage.
The Operating Panel is clearly identified with a product label.
Date/Signature:

Visual inspection of the Transceiver Unit

A visual inspection of the Transceiver Unit is required to verify its physical condition and
appearance prior to delivery.
Prerequisites
The ST90 system has been set up with its hardware units connected as specified in the
Installation Manual. The ST90 system is turned off. Neither tools nor instruments are
required.
Procedure
1 Make sure that the unit's serial number has been recorded in the list of hardware items.
2 Make sure that the Transceiver Unit is new.
20
Results
442728/B