M9
Power will be automatically turned on when a signal is received from an
administrator's computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function. The
battery retention time will be shorter than the times listed in this manual
when this function is enabled. Refer to the section in chapter 6,
data with power
Enabled
Disabled
On Battery
The following settings can be changed when the Wake-up on LAN is
Enabled.
Enabled
Disabled
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled
Device Config
Device Configuration
This option allows you to set how the computer's hardware devices will be
configured.
All Devices
Setup by OS
7-6
off.
Enables Wake-up on LAN.
Disables Wake-up on LAN (Default).
Enables Wake-up on LAN function when
operating from the battery.
Disables Wake-up on LAN function when
operating from the battery (Default).
Enables Built-in LAN functions (Default).
Disables Built-in LAN functions.
The computer's BIOS will setup and configure all
devices.
The operating system will setup and configure all
of the devices that it can control (default).
Retaining
User's Manual