Indicators - Toshiba Tecra M9 User Manual

Memory module slot
LCD Sensor switch
Do not put any magnetic objects close to this switch as they may cause the
computer to automatically enter Hibernation Mode and shut down even if
the Panel Power Off feature is disabled.

Indicators

This section explains indicator functions.
System indicators
LED system indicators next to their respective icons, glow when specific
computer operations are in progress.
SD Card
DC IN
User's Manual
The slot A memory module is located here.
The memory module slot allows for the
installation, replacement and removal of
additional memory module.
Refer to the Additional memory module
Chapter 3, Hardware, Utilities and
This switch senses when the display panel is
either closed or opened and activates the Panel
Power Off/On feature as appropriate. For
example, when you close the display panel the
computer enters Hibernation Mode and shuts
itself down and then, when you next open the
display, the computer will automatically start up
and return you to the application you were
previously working on.
You can specify within the Power Options.
To access it, click Start -> Control Panel ->
System and Maintenance -> Power Options.
System indicators
The SD Card indicator glows green when the
computer is accessing the device in the SD Card
slot.
The DC IN indicator normally glows green when
power is being correctly supplied from the AC
power adaptor. However, If the output voltage
from the adaptor is abnormal, or if the computer's
power supply malfunctions, this indicator will
flash orange.
M9
section in
Options.
2-11