Usb Floppy Disk Drive - Toshiba Tecra M9 User Manual

M9
Some CD/DVDs run
correctly, but others do
not

USB floppy disk drive

For further information, please refer to Chapter 3,
Options.
Problem
Drive does not operate Check the connection between the computer and
Some programs run
correctly but others do
not
You cannot access the
external floppy disk
drive
8-10
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's needs.
Check the CD/DVD's documentation.
Check the type of CD/DVD you are using.
The drive supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD™
(single/multi-session), CD-ROM
Mode 1, Mode 2, CD-ROM XA
Mode 2 (Form1, Form2), Enhanced
CD (CD-EXTRA), Addressing
Method 2
Recordable DVD: DVD-R/-R DL, DVD+R/+R DL,
DVD-RW, DVD+RW, DVD-RAM
Check the region code on the DVD. It must
match that on the DVD Super Multi drive. Region
codes are listed in the
in Chapter 2, The Grand
Procedure
the drive to ensure that it is properly attached.
The computer's software or hardware
configuration may be causing a problem - ensure
that these configurations match your
requirements (refer to any relevant
documentation, for example that supplied with
any software in use, for further information).
Try another floppy disk in the drive - if you are
able to access this disk then it indicates the
original disk and not the drive is probably causing
the problem.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Optical disc drives
Tour.
Hardware, Utilities and
User's Manual
section