KTM 450 EXC-F Six Days 2019 Setup Instructions page 29

3.14 Connecting the negative cable of the battery
3.15 Removing the battery
Warning
Risk of injury 12 V batteries contain harmful substances.
–
Keep 12 V batteries out of the reach of children.
–
Keep sparks and open flames away from 12 V batteries.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging 12 V batteries.
Minimum clearance
–
Do not charge deeply discharged 12 V batteries if the charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of 12 V batteries with less than the minimum voltage correctly.
Main work
–
Connect negative cable
Guideline
Screw, battery termi-
nal
Contact disks
the cable lug
T02638-10
Finishing work
–
Mount the seat. (
1 m (3 ft)
9 V
Preparatory work
(EXC‑F EU/AU, EXC‑F Six Days EU)
–
Press and hold the kill switch
until the engine stops.
(All US models)
–
Turn the ignition key in the ignition lock to the position
while the engine is idling.
–
Remove the seat. (
1
of the battery.
M5 2.5 Nm
(1.84 lbf ft)
A
must be mounted under the screw
3
with the claws toward the battery terminal.
p. 26)
while the engine is idling
p. 25)
WORK 3
2
and
27