KTM 450 EXC-F Six Days 2019 Setup Instructions page 19

–
Press the spring with special tool
Footrest spring plier (79029083000)
The special tool is applied to area
–
cl
Mount pin
F01080-10
–
Mount the washer and splint
F01081-10
–
Position the frame protectors on both sides.
–
Mount and tighten screws
Guideline
Screw, frame protec-
tor
–
Mount and tighten screws
Guideline
Screw, frame protec-
F01078-10
tor
–
Mount the cable tie.
(All EXC‑F Six Days, EXC‑F AU)
–
Install the engine guard. (
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
–
Attach the stickers included in the scope of supply (optional).
–
Set the kilometers or miles. (
–
Set the combination instrument. (
–
Set the clock. (
–
Refuel. ( p. 36)
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
–
Prepare the vehicle according to the specifications in the
KTM Dealer.net for handover to the customer.
bs
.
I
on the footrest.
.
cm
.
cn
.
M5 3 Nm (2.2 lbf ft)
co
with the washers.
M5 3 Nm (2.2 lbf ft)
p. 35)
p. 37)
p. 38)
p. 39)
SETUP 2
17