2 SETUP
8
(EXC‑F EU/AU, EXC‑F Six Days EU)
–
Mount the turn signal switch.
402390-01
Condition
Packaging V12
–
Join all plug-in connectors to the connector board.
–
Route the cable without tension and secure with a cable
tie.
S01409-10
(EXC‑F Six Days EU)
Warning
Voiding of the government approval for road use and
the insurance coverage If the combination switch
is installed, the vehicle's approval for road use is
invalidated.
–
S01411-01
–
(Optional) Remove the protection cap and join the plug-in
connector of the left combination switch.
–
Route the cable without tension and secure with cable ties and
cable holders.
S01412-10
Only operate the vehicle in closed-off areas
remote from public road traffic if the combina-
tion switch is installed.