ICON PRO-FORM COACHLINK T 9.0 User Manual page 17

18. Press the two tabs on the Tablet Holder (26) into
the slots (K) in the console assembly (G).
Attach the Tablet Holder (26) with four M4 x
16mm Screws (24). Note: Start the two top
Screws fi rst, and then start the two bottom
Screws. Be careful not to overtighten the
Screws.
IMPORTANT: The Tablet Holder (26) is
designed for use with most full-size tablets.
Do not place any other electronic device or
object in the Tablet Holder.
19. Tighten all eight indicated Screws (2, 3, 4).
18
Start First
24
19
2, 3, 4
17
26
G
K
2, 3, 4