Device Config; Device Configuration - Toshiba Tecra M3-105 User Manual

Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled

Device Config

Device Configuration

This option lets you set the device configuration.
All Devices
Setup by OS
PCI Express Link ASPM
This feature lets you set the PCI Express power-saving configuration.
Enabled
Disabled
Auto
Parallel/Printer
Some models are equipped with Parallel/Printer tab. This tab lets you set
the Parallel Port Mode. Use the Windows Device Manager to make settings
for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP
Standard
Bi-directional
User's Manual
Enables Built-in LAN functions (Default).
Disables Built-in LAN functions.
BIOS sets all devices.
Operating system sets devices that it can control
(Default).
Enables power-saving when the PCI Express
device is not being used.
Disables power-saving for performance.
Power-saving is enabled when the battery power
supply is used and the PCI Express device is not
being used (Default).
Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to ECP (Default).
This setting should be used with some other
parallel devices.
HW Setup
7-7