Using Optical Media Drives; Loading Discs - Toshiba Tecra M3-105 User Manual

Using optical media drives

The text and illustrations in this section refer primarily to the optional media
drive. However, operation is the same for other optical drive in the Slim
Select Bay. The full-size drive provides high-performance execution of
CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm
(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is
used for CD/DVD-ROM operation. When the computer is accessing a
CD/DVD-ROM, an indicator on the drive glows and the Slim Select Bay
indicator glows.
Use the WinDVD application to view DVD-Video discs.
If you have a DVD-ROM&CD-R/RW drive, refer also to the
DVD-ROM&CD-R/RW drive
If you have a DVD±R/±RW drive, refer also to the
DVD±R/±RW drive (DVD Dual drive)
CDs.
If you have a DVD Super Multi drive, refer also to the
DVD Super Multi drive
When the power of the optical media drive is off, pressing the Fn + Tab
keys will turn the power of the optical media drive on. Furthermore, it is
possible to set it to turn the power of the optical media drive on and eject
the tray at the same time.

Loading discs

To load CD/DVDs, follow the steps below and refer to the following figures.
1. When the computer's power is on, press the eject button to open the
disc tray slightly.
User's Manual
section for precautions on writing to CDs.
section for precautions on writing to
section for precautions on writing to CDs.
Pressing the eject button
Operating Basics
Writing CDs on
Writing CD/DVDs on
Writing CD/DVDs on
Eject Button
4-7