Usb Floppy Disk Drive; External Monitor - Toshiba Tecra M3-105 User Manual

3. Close the lid and slide the lock to the lock position.
For details on inserting the Slim Select Bay HDD adaptor in the computer's
Slim Select Bay slot, refer to Chapter 4,

USB floppy disk drive

The USB floppy disk drive module can be connected to the USB port. For
details on connecting the USB floppy disk drive module, refer to Chapter 4,
Operating

External monitor

An external analog monitor can be connected to the external monitor port
on the computer. The computer supports VGA and Super VGA video
modes. To connect a monitor, follow the steps below.
1. Turn the computer's power off.
2. Connect the monitor cable to the external monitor port.
3. Turn the monitor's power on.
4. Turn the computer's power on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
User's Manual
Figure 8-20 Closing the lid
Basics.
External monitor port
Connecting the monitor cable to the external monitor port
Operating Basics.
Monitor cable
Optional Devices
8-17