Usb Mouse - Toshiba Tecra M3-105 User Manual

Troubleshooting
Problem
Double-tapping (Touch
Pad) or double-
clicking (AccuPoint)
does not work

USB mouse

Problem
On-screen pointer
does not respond to
mouse operation
Double-clicking does
not work
The mouse pointer
moves too fast or too
slow
The mouse pointer
moves erratically
9-16
Procedure
Try changing the double-click speed setting in
the mouse control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
If problems persist, contact your dealer.
Procedure
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Try changing the double-click speed setting in
the mouse control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
Try changing the speed setting in the mouse
control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
The mouse might be dirty. Refer to your mouse
documentations for instructions on cleaning.
If problems persist, contact your dealer.
User's Manual