Password; Keyboard - Toshiba Tecra M3-105 User Manual

Real Time Clock
Problem
The following
message is Displayed
on the LCD screen:
RTC battery is
low or CMOS
checksum is
inconsistent.
Press [F1] key to
set Date/Time.

Password

Problem
Cannot enter
password

Keyboard

Keyboard problems can be caused by your setup configuration. For more
information refer to Chapter 5,
Problem
Some letter keys
produce numbers
Output to screen is
garbled
User's Manual
Procedure
The battery for RTC is wearing. Set the date and
time in BIOS setup with the following steps:
1. Press F1 key. BIOS setup will boot up.
2. Set the date in System Date.
3. Set the time in System Time.
4. Press End key. Confirmation message will
appear.
5. Press Y key. BIOS setup will terminate and
the computer will be rebooted.
Procedure
Refer to the TOSHIBA Password Utility
Chapter 6, Power and Power-Up Modes.
The Keyboard.
Procedure
Check that the numeric keypad overlay is not
selected. Press Fn + F10 and try typing again.
Make sure the software you are using is not
remapping the keyboard. Remapping involves
reassigning the meaning of each key. See your
software's documentation.
If you are still unable to use the keyboard,
consult your dealer.
Troubleshooting
section in
9-7