Table of Contents
Advertisement
AXIS Q60-E Series
Specifications
LED indicators
Status LED
Unlit
Green
Amber
Amber/Red
SD card slot
NOTICE
TICE
NO
NO
TICE
• Risk of damage to SD card. Don't use sharp tools, metal objects, or excessive force when inserting or removing the SD card.
Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Unmount the SD card from the device's web interface before removing it.
Don't remove the SD card while the product is running.
This device supports SD/SDHC/SDXC cards.
For SD card recommendations, see axis.com.
SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or registered
trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
The control button is used for:
•
Resetting the product to factory default settings. See Reset to factory default settings on page 62.
Power button
•
Press and hold the power button to temporarily power the product when the dome cover is removed.
•
The power button is also used with the control button to reset the camera to factory default settings. See page 62.
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after startup completed.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Flashes amber/red if network connection is unavailable or lost.
60
Advertisement
Table of Contents
