Table of Contents
Advertisement
AXIS Q60-E Series
Configure your device
4. The current pan and tilt positions show up in the live view image and in the recording.
Add street names and compass direction to the image
Note
The preset positions and compass direction will be visible in the compass field in all video streams and recordings.
To activate the compass:
1. Go to PTZ > Orientation aid.
2. Turn on Orientation aid.
3. Position the camera view at north with the crosshair. Click Set north.
To add a preset position to show in the compass field:
1. Go to PTZ > Preset positions.
2.
Use the crosshair to position the view where you want to add a preset position.
3. Click
Adjust the camera view (PTZ)
Limit the pan, tilt, and zoom movements
If there are parts of the scene that you don't want the camera to reach, you can limit the pan, tilt, and zoom movements. For
example, you want to protect the privacy of residents in an apartment building, which is located close to a parking lot that you
intend to monitor.
To limit the movements:
1. Go to PTZ > Limits.
2. Set the limits as needed.
Create a guard tour with preset positions
A guard tour displays the video stream from different preset positions either in a predetermined or random order, and for configurable
periods of time.
1. Go to PTZ > Guard tours.
2. Click
3. Select Preset position and click Create.
4. Under General settings:
-
Enter a name for the guard tour and specify the pause length between each tour.
-
If you want the guard tour to go to the preset positions in a random order, turn on Play guard tour in random
order.
5. Under Step settings:
-
Set the duration for the preset.
Add preset position to create a new preset position.
Guard tour.
11
Advertisement
Table of Contents
