Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Axis Manuals
  4. Security Camera
  5. Q60-E Series
  6. Repainting instructions

Axis Q60-E Series Repainting Instructions

Network dome camera
Hide thumbs Also See for Q60-E Series:

Advertisement

Quick Links

Download this manual
AXIS Q60–E Network Dome Camera Series
Repainting Instructions

Advertisement

loading
Need help?

Need help?

Do you have a question about the Q60-E Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Axis Q60-E Series

Summary of Contents for Axis Q60-E Series

  • Page 1 AXIS Q60–E Network Dome Camera Series Repainting Instructions...

  • Page 2: Impact On Warranty

    Risks with repainting There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include: ESD Damage - Always handle the product in an ESD safe environment.

  • Page 3: How To Repaint The Product

    Clean the parts properly to remove oil, grease and dust. For more information on the materials used in the product, see its datasheet at www.axis.com Powder coated parts - Using fine sandpaper, remove the original powder coating down to the base material and clean the parts before painting, or use a primer.
  • Page 4 AXIS Q60–E Network Dome Camera Series How to repaint the product Disassembly 1. Remove the dome module assembly (4 screws). 2. Remove the four screws and separate the dome module bracket, dome with dome module sealing and dome cover ring...
  • Page 5 AXIS Q60–E Network Dome Camera Series How to repaint the product 3. Loosen the unit assembly (3 screws). 4. Lift the unit assembly upwards and remove the connector from the PCB assembly power by pulling the connector upwards.
  • Page 6 AXIS Q60–E Network Dome Camera Series How to repaint the product 5. Remove the push-pull connector housing (2 screws). 6. Remove the chassis hook (3 screws). 7. Remove the three bayonet screws.
  • Page 7 2. Mask the entire opening in the bottom of the chassis. Make sure that the masking line is close to the original paint border so that no paint particles can reach the inside of the camera. Outline drawing of the opening can be found on www.axis.com.
  • Page 8 AXIS Q60–E Network Dome Camera Series How to repaint the product 6. Apply a thin and even layer of spray paint according to the instructions of the paint manufacturer. 7. Let the paint dry. 8. To get a better coverage and clearer color, apply a second layer of spray paint.
  • Page 9 AXIS Q60–E Network Dome Camera Series How to repaint the product Reassembly 1. Attach the three bayonet screws (1.8 N m). 2. Reassemble the chassis hook (3 screws, 2.4 Nm). 3. Reassemble the push-pull connector housing (3 screws, 0.3 N m). Make sure the orientation of the push-pull connector...
  • Page 10 AXIS Q60–E Network Dome Camera Series How to repaint the product 4. Attach the connector from the PCB assembly power. 5. Reassemble the unit assembly (3 screws, 4 N m). 6. Assemble the dome module bracket, dome with dome module sealing and dome cover ring (4 screws, 1.2 N m).
  • Page 11 AXIS Q60–E Network Dome Camera Series How to repaint the product 7. Reassemble the dome module assembly (4 screws, 4 N m). Make sure the orientation of the dome module is correct. The opening of the dome should be placed on top of the heater assembly.
  • Page 12 Repainting Instructions Ver. M1.3 AXIS Q60–E Network Dome Camera Series Date: October 2018 © Axis Communications AB, 2018 Part No. T10131153...