Network Configuration; Initializing Device - Dahua IPC-HFW5241T-AS-PV Quick Start Manual

Device initialization and IP setting can be finished with the "ConfigTool" or in web interface. For
more information, see the WEB operation manual.
 Device initialization is available on select models, and it is required at first use and after
device is being reset.
Device initialization is available only when the IP addresses of the device (192.168.1.108

by default) and the PC stays in the same network segment.
Planning useable network segment properly to connect the device to the network.

The following figures and interfaces are for reference only, and the actual product shall

prevail.

2.1 Initializing Device

Step 1 Double-click "ConfigTool.exe" to open the tool.
Step 2 Click
The Modify IP interface is displayed. See Figure 2-1.
Step 3 Click Search setting.
The Setting interface is displayed.
Step 4 Enter the start IP and end IP of the network segment in which you want to search
devices, and then click OK.
2

Network Configuration

.
Figure 2-1 Modify IP interface
Network Configuration 4