Related Manuals for Dahua IPC-HFW8101E
Summary of Contents for Dahua IPC-HFW8101E
- Page 1 Dahua HD IR WDR Network Camera User’s Manual Version 1.1.0 Zhejiang Dahua Technology CO., LTD...
- Page 2 Welcome Thank you for purchasing our network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!
-
Page 3: Important Safeguards And Warnings
Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please note: Do not connect two power supplying sources to the device at the same time;... - Page 4 Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device.
-
Page 5: Table Of Contents
Table of Contents General Introduction ........................1 Overview ........................1 Features ......................... 1 Specifications ........................ 2 1.3.1 Performance ......................2 Framework ..........................10 Cable ..........................10 Framework and Dimension ..................11 Device Installation ........................13 Quick Configuration Tool ......................15 Overview ........................ -
Page 6: General Introduction
1 General Introduction 1.1 Overview This series network camera integrates the traditional camera and network video technology. It adopts video data collection, transmission together. It can connect to the network directly without any auxiliary device. This series network camera uses standard H.264 video compression technology, which maximally guarantees the video quality. -
Page 7: Specifications
Support video watermark function to avoid vicious video modification. Support dual bit streams, ACF. 1.3 Specifications 1.3.1 Performance Please refer to the following sheet for network camera performance specification. Model IPC-HFW8101E IPC-HFW8101E-Z Parameter Main TI high performance DSP Processor Embedded LINUX... - Page 8 NTSC: Main stream Max(1280*1024@30fps), Extra stream Max(704*480@30fps), Third stream Max(1280*1024@30fps) 16kbps～14Mbps adjustable Video Bit Rate Support customized setup. Video Flip Support rotate mode Snapshot Max 1f/s snapshot. File extension name is JPEG Privacy Mask support max 4 privacy mask zones Video Setup Support parameter setup such as bright, contrast, acutance.
- Page 9 Consumption Working -30℃~+60℃ Temperature Working ≤95% Humidify Dimensions 94.9*94.9*272.9 Weight 1200g (excluding box) Installation Support various installation modes Model IPC-HFW8201E IPC-HFW8201E-Z Parameter Main TI high performance DSP Processor Embedded LINUX System Support real-time network, local record, and remote operation at the same Resources time.
- Page 10 16kbps～20Mbps, adjustable Video Bit Rate Support customized setup. Video Flip Support rotate mode Snapshot Max 1f/s snapshot. File extension name is JPEG Privacy Mask support max 4 privacy mask zones Video Setup Support parameter setup such as bright, contrast, acutance. Video Channel title, time title, motion detect, tampering detect.
- Page 11 Working ≤95% Humidify Dimensions 94.9*94.9*272.9 Weight 1200g (excluding box) Installation Support various installation modes Model IPC-HFW8301E IPC-HFW8301E-Z Parameter Main TI high performance DSP Processor Embedded LINUX System Support real-time network, local record, and remote operation at the same Resources time. User Interface Remote operation interface such as WEB, DSS, PSS System Status...
- Page 12 Video Setup Support parameter setup such as bright, contrast, acutance. Video Channel title, time title, motion detect, tampering detect. Information Intelligent Tripwire, cross warning zone, abandoned /missing object detection, scene Detection change detection, defocus detection. Face Detect face in video and link according to the result. Recognition Audio Detect if there is audio input, filter noise, scream emergency and etc.
- Page 13 Model IPC-HFW8281E Parameter Main TI high performance DSP Processor Embedded LINUX System Support real-time network, local record, and remote operation at the same Resources time. User Interface Remote operation interface such as WEB, DSS, PSS System Status Bit stream statistics, log, and software version. Image Sensor 1/1.9-inch CMOS 1920(H)×1080(V)
- Page 14 Detection Anti-IR Auto detect image brightness, anti-overexposure via internal algorithm, and Overexposure guarantee background brightness at the same time. Lens 4mm～12mm/F1.8 φ14 interface, default lens Lens Interface Video 1-ch composite analog video output Interface Audio Input 1-channel， 3.5mm JACK LINE IN Audio Output 1-channel，...
-
Page 15: Framework
2 Framework 2.1 Cable You can refer to the following figure for cable information. See Figure 2-1 Figure 2-1 Cable Please refer to the following sheet for detailed information. No. Port Function Connection Note Name AUDIO Audio output Output audio signal to speaker and etc. port AUDIO Audio input... -
Page 16: Framework And Dimension
Port Name Name Note Alarm output port. It is to output the alarm signal to the alarm device. ALARM_NO NO: normal open alarm output port. It must be used with ALARM_COM. ALARM_COM Alarm output public port. I/O Port Alarm input port 1. It is to receive the on-off signal from ALARM_IN1 the external alarm source. - Page 17 Figure 2-3 Dimension illustration 2...
-
Page 18: Device Installation
3 Device Installation Important Please make sure the installation surface can min support the 3X weight of the camera and the bracket. Figure 3-1 Device installation 1 Please see Figure 3-1 and Figure 3-2. Step 1 Stick installation map to designated surface where you will install the device (wall or ceiling). Step 2 Dig a hole according to position of hole on installation map. - Page 19 Figure 3-2 Device installation 2 Step 6 Use wobbler driver (in accessories bag) to loosen adjusting screw. Step 7 Adjust the device in all possible directions, and set its monitoring direction. Step 8 Use wobbler driver to tighten the screws.
-
Page 20: Quick Configuration Tool
4 Quick Configuration Tool 4.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 4.2 Operation Double click the “ConfigTools.exe”... - Page 21 In the configuration tool search interface (Figure 4-1), please select a device IP address and then double click it to open the login interface. Or you can select an IP address and then click the Login button to go to the login interface. See Figure 4-3. In Figure 4-3, you can view device IP address, user name, password and port.
-
Page 22: Web Operation
5 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 5.1 Network Connection Please follow the steps listed below for network connection. ... - Page 23 Figure 5- 2 Web login After you successfully logged in, please install WEB plug-in unit. Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction. See Figure 5- 3. Figure 5- 3 Web monitoring window...
-
Page 24: Faq
6 FAQ I can not boot up Please click RESET button for at least five seconds to restore the device or factory default setup. operate properly. The water leakage The unauthorized front or rear cap remove many result in water occurred. -
Page 25: Appendix Toxic Or Hazardous Materials Or Elements
If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website for more information. Zhejiang Dahua Technology CO., LTD. Address：No.1199 Bin’an Road, Binjiang District, Hangzhou, PRC. Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email:overseas@dahuatech.com...