Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Dahua IPC-HFW1XXXS
Summary of Contents for Dahua IPC-HFW1XXXS
- Page 1 Dahua IR Wi-Fi Bullet Camera Quick Start Guide V 1.0.2 Dahua Vision Technology CO., LTD...
- Page 2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
- Page 3 1 1 1 1 Packing List Packing List Packing List Packing List Device × 1 Screw Package ×1 QSG ×1...
- Page 4 2 2 2 2 Product Appearance Product Appearance Product Appearance Product Appearance Figure 2-1 Please refer to the following sheet for more details about the device. Name ① Ethernet port Note The device can be directly connected to computer. ② Power port ③...
- Page 5 Figure 2-2 Please refer to the following sheet for more details about each component. Name ① Reset/ WPS (Wi-Fi Protected Setup) button ② Indicator light 1 ③ Lower cover ④ Micro SD card slot ⑤ Indicator light 2 ⑥ Waterproof ring ⑦...
- Page 6 Please refer to the following sheet for more details about status of indicator light. Indicator light status Device status Red light stably on Booting Booting completed, await Wi-Fi config, Green light slow flashing enter smart config status; Wi-Fi smart config in progress, including Green light quick flashing WPS (Wi-Fi Protected Setup), management frame, etc.
- Page 7 3 3 3 3 Operate by Easy4ip APP Operate by Easy4ip APP Operate by Easy4ip APP Operate by Easy4ip APP Step 1 Power on the device with power adapter. Step 2 Connect your smart phone to your Wi-Fi network. Scan the “Easy4ip” QR on the packing box, download and install the Easy4ip APP.
- Page 8 Figure 3-2 Step 5 Scan the QR code on the back of the camera to get the SN, you can also tap “Continue without scanning” and manually input the SN number on the next page.
- Page 9 Figure 3-3 Step 6 Fill in the Username and Password of the new camera, both of which are admin by default.
- Page 10 Figure 3-4 Step 7 Select “Yes, config Wi-Fi”, and fill in your Wi-Fi password, then tap “Next”.
- Page 11 Figure 3-5 Figure 3-6 Step 8 Your Camera will be added to your account.
- Page 12 Figure 3-7 Note: If you have more cameras, please follow steps 4-8 to add them one by one. If you want to change the Wi-Fi signal, please reset the camera to factory default and repeat steps 4-8 to add the device.
- Page 13 4 4 4 4 Network Configuration Network Configuration Network Configuration Network Configuration The IP address of all the cameras is the same when leaving factory (default IP 192.168.1.108). To make the camera access to the network smoothly, please plan the available IP segment reasonably according to the actual network environment.
- Page 14 Step 4 Click ,and double click the default IP, See Error! Reference source not found. for the main interface. Error! Reference source not found.
- Page 15 5 5 5 5 Device Installation Device Installation Device Installation Device Installation Important Before the installation, please make sure the installation environment can at least support 3x weight of the camera. Figure 5-1 Please see Figure 5-1 and Figure 5-2. Step 1 Dig holes on the installation surface (wall or ceiling).
- Page 16 If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website or contact your local service engineer for more information. Dahua Vision Technology Co., Ltd Address：No.1199 Bin’an Road, Binjiang District, Hangzhou, PRC.
Need help?
Do you have a question about the IPC-HFW1XXXS and is the answer not in the manual?
Questions and answers