Network Configuration; Initializing The Camera - Dahua IPC-HF5541F-ZE-S3 Quick Start Manual

Box network camera

Table of Contents

Device initialization and IP setting can be finished with the ConfigTool or on web page. For more

information, see web operation manual.

● Device initialization is available on select models, and it is required at first-time use and after

device is reset.

● Device initialization is available only when the IP addresses of the Camera (192.168.1.108 by

default) and the PC stay on the same network segment.

● Plan usable network segment properly to connect the Camera to the network.

● The following figures are for reference only.

Step 1

Double-click ConfigTool.exe to open the tool.

Click Modify IP.

Step 2

Step 3

Click Search Setting.

Step 4

Select the searching way.

● Current Segment Search (default)

Select the Current Segment Search checkbox. Enter the username in the Username

box and the password in the Password box. The system will search for the Camera

accordingly.

● Other Segment Search

Select the Other Segment Search checkbox. Enter IP address in the Start IP box and

End IP box respectively. Enter user name and password. The system will search for the

Camera accordingly.

2 Network Configuration

Figure 2-1 Setting

Quick Start Guide

Table of Contents

Do you have a question about the IPC-HF5541F-ZE-S3 and is the answer not in the manual?