Custom Door Panel Installation - Viking FDSB5423 Installation Manual

Custom Door Panel Installation

1
Remove handle side cabinet screws and trim
with a Phillips screwdriver.
3
Remove bracket.
5
x13
Attach "Z" bracket to the hinge side of custom panel.
Attach bracket to the handle side of custom panel.
2
x13 x13
Remove all screws from handle side door trim.
Remove two screws from top and bottom door trim. Remove
4
2-13/16" 2-13/16"
(7.1 cm) (7.1 cm)
Bottom-mount Bottom-mount
12-1/16" 12-1/16"
(30.6 cm) (30.6 cm)
All Refrigerator/ All Refrigerator/
Freezer/ Freezer/
Side-by-side Side-by-side
Measure and mark the fi rst hole for each bracket.
6
x13
Push custom wood panel onto door.
19
handle side door trim.
2-1/16" 2-1/16" 1-11/16" 1-11/16"
(5.2 cm) (5.2 cm) (4.3 cm) (4.3 cm)
2-1/8" 2-1/8" 2-1/8"
(5.4 cm) (5.4 cm) (5.4 cm)
Back of panel Back of panel
"Z" bracket "Z" bracket FOL bracket FOL bracket
x2
x2